
Firmware for Kvaser USBcan II 
===========================================================================

To update the firmware,

1) Use e.g. WinZip or the free unzipper found at www.kvaser.com, 
   to unpack the files into an empty directory,

2) Double-click on "update_usbcan2".

3) You need to disconnect the device and also any power supply connected to
   it, and reconnect it again before you can use it.

+---------------------------------------------------------------------+
| CAUTION: be sure to download the correct version for your hardware. |
| The software will try to check the hardware and firmware versions   |
| before changing the firmware, but if you are unlucky you will end   |
| up with a dead unit.                                                |
+---------------------------------------------------------------------+


After programming, the window will typically look like this:

C:\temp\firm\usb>pause
Press any key to continue . . .

Firmware programmer for USBcan Rev B, USBcan II, Kvaser Memorator,
   PCIcan II, etc.
Copyright 2002-2003 KVASER AB, Sweden - http://www.kvaser.com

Serial Number:            0000310
Hardware version:         6.0
Current Firmware Version: 1.06.026
Hardware type:            USBcan II

Using firmware file 'usbcan2_p030a_nodebug.img'
Loading image file 'usbcan2_p030a_nodebug.img'...
Binary data: size=14008, start_addr=0xc0018, load_addr=0xc0000
Firmware data:
  Build string: 1.06.026 (Feb  4 2003 22:02:19)
  HAL:          DIANA_C
  Variant:      STANDARD
  Image type:   FIRMWARE
Erasing...
Download started: ##############
Download complete.
Starting compare: ##############
Compare finished.

C:\temp\firm\usb>pause
Press any key to continue . . .


